Rohde & Schwarz MXO 4 Series - Page 866

Remote control commandsMXO 4 Series
866User Manual 1335.5337.02 ─ 07
Suffix:
<wg>
.
1...2, index of the waveform generator
Parameters:
<Deviation> Range: 0.001 to 10000000
Increment: 1
*RST: 1000
Default unit: Hz
Usage: Asynchronous command
Manual operation: See "Deviation" on page 440
WGENerator<wg>:MODulation:FM:FREQuency
<Frequency>
Sets the frequency of the modulating waveform for FM modulation.
Suffix:
<wg>
.
1...2, index of the waveform generator
Parameters:
<Frequency> Range: 0.001 to 1000000
Increment: 0.001
*RST: 1000
Default unit: Hz
Usage: Asynchronous command
Manual operation: See "Frequency" on page 440
WGENerator<wg>:MODulation:FM:SYMMetry <RampSymmetry>
Sets the symmetry for the FM ramp modulation waveform, the percentage of time that
the waveform is rising.
Suffix:
<wg>
.
1...2, index of the waveform generator
Parameters:
<RampSymmetry> Range: 0 to 100
Increment: 1
*RST: 50
Default unit: %
Usage: Asynchronous command
Manual operation: See "Symmetry" on page 440
WGENerator<wg>:MODulation:FM[:FUNCtion] <SignalType>
Selects the type of the modulating signal for FM modulation.
Suffix:
<wg>
.
1...2, index of the waveform generator
Waveform generator (option R&S MXO4-B6)