Instrument setupMXO 4 Series
88User Manual 1335.5337.02 ─ 07
Remote command:
DISPlay:DIALog:FONTsize on page 496
Transparency (Dialog)
Sets the transparency of the dialog box background. For high transparency values, you
can see the waveform display in the background, and possibly check the effect of the
changed setting. For lower transparency values, readability in the dialog box improves.
You can also set the dialog transparency by moving the transparency bar at the top of
the dialog.
Remote command:
DISPlay:DIALog:TRANsparency on page 497
Font size (Result dialog)
Sets the font size of the text in result tables.
Remote command:
DISPlay:RESult:FONTsize on page 497
5.3.4 Peak list
Access: "Settings" > "Appearance" > "Peak list"
Peak list settings apply to peak list measurements. They are visible when the peak list
for spectrum measurements is enabled.
Frame type
Defines the layout of the labels, full border or none.
Appearance settings
To Next Page
Loading...
