Instrument Functions
NRP2
159User Manual 1173.9140.02 ─ 07
4.7.4.1 Information on sensors
► Select "Sensor Info..."
in the "System" menu.
Fig. 4-90: Sensor info dialog
A | B | C | D
Tabs for selecting the sensor.
Note: In remote-control commands, select the sensor with the suffix in command
SENSe<[1]..4>:...
, i.e. choose suffix 1 for channel A, channel 2 for B, and so on.
(Sensor info)
The sensor info dialog shows the information on the selected sensor.
Remote command:
SYSTem:SENSor<[1]..4>:
INFO? on page 326
4.7.4.2 Information on the R&S NRP2
► Select "System Info..." in the "System" menu.
Fig. 4-91: System info dialog
(System info)
The system info dialog displays information concerning hardware and firmware of your
R&S NRP2.
System settings
北京海洋兴业科技股份有限公司（证券代码：839145）
To Next Page
Loading...
