Rohde & Schwarz NRP2 - Page 206

Remote Control - Commands
NRP2
203User Manual 1173.9140.02 ─ 07
Command Preset and *RST value Remark
SENS<[1]..4>:SGAM:PHAS <NRf>
Depending on sensor.
SENS<[1]..4>:SMO:STAT ON | OFF
Depending on sensor.
SENS<[1]..4>:STAT:OFFS <NRf>
Depending on sensor.
SENS<[1]..4>:STAT:SAMP <NR1>
Depending on sensor.
SENS<[1]..4>:STAT:SCAL:X:POIN <NR1>
Depending on sensor.
SENS<[1]..4>:STAT:SCAL:X:RANG <NRf>
Depending on sensor.
SENS<[1]..4>:STAT:SCAL:X:RLEV <NRf>
Depending on sensor.
SENS<[1]..4>:STAT:TIME <NRf>
Depending on sensor.
SENS<[1]..4>:TIM:EXCL:STARt <NRf>
Depending on sensor.
SENS<[1]..4>:TIM:EXCL:STOP <NRf>
Depending on sensor.
SENS<[1]..4>:TRAC:AVER ON | OFF
Depending on sensor.
SENS<[1]..4>:TRAC:AVER:COUN <NR1>
Depending on sensor.
SENS<[1]..4>:TRAC:AVER:COUN:
AUTO
OFF
Depending on sensor.
SENS<[1]..4>:TRAC:AVER:COUN:
AUTO:MTIMe
<NRf>
Depending on sensor.
SENS<[1]..4>:TRAC:AVER:COUN:
AUTO:RES
<NRf>
Depending on sensor.
SENS<[1]..4>:TRAC:AVER:COUN:
AUTO:POIN
<NR1>
Depending on sensor.
SENS<[1]..4>:TRAC:AVER:COUN:
AUTO:NSR
<NRf>
Depending on sensor.
SENS<[1]..4>:TRAC:AVER:COUN:
AUTO:TYPE
RES | NSR
Depending on sensor.
SENS<[1]..4>:TRAC:AVER:TCON MOV
REP
PRES and SYSTem:
PRESet
.
*RST.
SENS<[1]..4>:TRAC:OFFS:TIME <NRf>
Depending on sensor.
SENS<[1]..4>:TRAC:POINt <NR1>
Depending on sensor.
SENS<[1]..4>:TRAC:TIME <NRf>
Depending on sensor.
SENS<[1]..4>:TRAC:REAL ON|OFF
Depending on sensor.
SERV<[1]..4>:SERR ON
Sample errors are signaled.
SYST:BEEP:NOT:KEY OFF
No key click.
SYST:BEEP:NOT:OVER OFF
No warning on sensor overload.
SYST:ERR:EXT OFF
No extended error message for
SYST:ERR?
SYST<[1]..4>:SPEed NORM
Depending on sensor.
SYST:STAN:PWS OFF
Window
Common Commands to IEEE 488.2
北京海洋兴业科技股份有限公司（证券代码：839145）
电话：010-62176775
网址：www.hyxyyq.com