Remote Control - Commands
NRP2
241User Manual 1173.9140.02 ─ 07
DISPlay:PIXMap?
Supplies the display content as binary block data. The block data consists of a block
data header (#577110) and the display content in Microsoft Windows (R) BMP format
(version 3). A color depth of 8 bit per pixel is used.
Parameters:
<pixmap> block_data
Example:
DISP:PIXM?
returns:
#577110xxxxxx...x,
with x in binary format comprising an 8-bit BMP bitmap of the
display content.
Usage: Query only
DISPlay:UPDate <update_frequency>
Adjusts the update frequency of the measured values in the display. In case of discon-
tinuities in the voltage progress at the analog outputs display updates may be suspen-
ded with DISP:UPD FREeze. The display won't consume CPU time in this state.
Parameters:
<update_frequency>
NORMal | SLOW | FREeze
*RST: NORMal
DISPlay[:WINDow]<[1]..4>:AVALue <avalue>
Determines which additional information about the measured values is shown in the
display (right-hand side, next to the main measured values).
DISPlay
北京海洋兴业科技股份有限公司（证券代码：839145）
To Next Page
Loading...
