Remote Control - Commands
NRP2
253User Manual 1173.9140.02 ─ 07
MEMory:TABLe:DATA:POINts?
The command returns the number of stored entries in the currently selected offset
table.
Usage: Query only
MEMory:TABLe:FREQuency <NRf> {, <NRf>}
This command enters frequencies in the first column of the table selected with
MEM:TABL:SEL
. Existing data for frequencies will be overwritten. The number of fre-
quencies should match the number of offset values. If the number of frequencies dif-
fers from the number of offset values, the shorter column length will be used.
SENS<[1]..4>:FREQ can be used to determine a frequency for which a correction
factor is then defined by means of the offset table. If the exact frequency selected is
not in the table, the values in the table are interpolated. If the selected frequency is out-
side the specified frequency range, the first or last offset value of the table is selected.
Interpolation is linear in the units HZ and DB.
Parameters:
<NRf> {, <NRf>} Enters frequencies in the first column of the table selected with
MEM:TABL:SEL
*RST: Tables are not changed in case of a *RST.
Default unit:
HZ
MEMory:TABLe:FREQuency:POINts?
Returns the number of entries (lines) in the table selected with MEM:TABL:SEL
<name>.
Usage: Query only
MEMory:TABLe:GAIN[:MAGNitude] <NRf> {, <NRf>}
This command enters offset values in the second column of the table selected with
MEM:TABL:SEL. Existing data for offset values will be overwritten. The number of fre-
quencies should match with the number of offset values. If the number of frequencies
differs from the number of offset values, the shorter column length will be used.
A frequency can be determined with SENS<[1]..4>:FREQ, for which a correction fac-
tor is then calculated by means of the offset table. If the exact frequency selected is not
in the table, the values in the table are interpolated. If the selected frequency is outside
the specified frequency range, the first or last offset value of the table is selected. Inter-
polation is linear in the units HZ and DB.
Unit: DB | PCT
MEMory
北京海洋兴业科技股份有限公司（证券代码：839145）
To Next Page
Loading...
