Rohde & Schwarz NRP2 - Page 292

Remote Control - Commands
NRP2
289User Manual 1173.9140.02 ─ 07
[SENSe<[1]..4>]:TRACe:MEASurement:POWer:MAX?
Returns the measured maximum power in the current trace.
Unit: WATT
Usage: Query only
[SENSe<[1]..4>]:TRACe:MEASurement:POWer:MIN?
Returns the measured minimum power in the current trace.
Unit: WATT
Usage: Query only
[SENSe<[1]..4>]:TRACe:MEASurement:POWer:PULSe:BASE?
Returns the base power, computed in the pulse level analysis histogram of the current
trace data.
Unit: WATT
Usage: Query only
[SENSe<[1]..4>]:TRACe:MEASurement:POWer:PULSe:TOP?
Returns the power of the first detected complete pulse of the current trace data, includ-
ing rising and falling edges.
Unit: WATT
Usage: Query only
[SENSe<[1]..4>]:TRACe:MEASurement:PULSe:DCYCle?
Returns the duty cycle of the current trace data.
Unit: PCT
Usage: Query only
[SENSe<[1]..4>]:TRACe:MEASurement:PULSe:DURation?
Returns the pulse duration (pulse width) of the first detected pulse in the current trace.
Unit: S
Usage: Query only
[SENSe<[1]..4>]:TRACe:MEASurement:PULSe:PERiod?
Returns the time the pulse signal needs to complete one cycle.
SENSe (Sensor Commands)
北京海洋兴业科技股份有限公司（证券代码：839145）
电话：010-62176775
网址：www.hyxyyq.com