Error Messages and Troubleshooting
NRP2
339User Manual 1173.9140.02 ─ 07
8 Error Messages and Troubleshooting
8.1 Status and Error Messages in Manual Control
Special characters and symbols indicated on the display inform about the status of the
power meter, see chapter 3.6.2, "Special symbols", on page 58.
Symbols especially used for indicating error are:
●
The signal level is outside the set limit
●
A trigger event is required, but missing. To adjust the trigger settings, see chap-
ter 4.2.6, "Trigger settings", on page 85.
Invalid settings for trace display are indicated by an error message in the info panel.
Example: trace function 'Ratio' is selected but only one channel is active
A more detailed description of the error can be found in the "Trace Function" menu.
Status and Error Messages in Manual Control
北京海洋兴业科技股份有限公司（证券代码：839145）
To Next Page
Loading...
