Instrument Functions
NRP2
61User Manual 1173.9140.02 ─ 07
4 Instrument Functions
Chapter "Instrument functions" explains the functions of the R&S NRP2 and its options.
The associated SCPI command is specified for each parameter (where applicable).
The description starts with general instrument settings accessed by the SETUP hard-
keys. The power meter functions are then described systematically, sorted by their
occurrence in the menus.
The instrument settings include various functions, such as:
●
chapter A.1, " Volatile Mode", on page 353
●
chapter 4.1, "Main Settings", on page 61
Setting a defined basic setup using the (PRE)SET key see chapter 4.1.1, "Preset
hardkey", on page 61
●
chapter 4.2, "Data acquisition and parameters", on page 64
●
chapter 4.3, "Displaying measurement results", on page 91
●
chapter 4.4, "Configuring measurements", on page 97
●
chapter 4.5, "Displaying traces", on page 113
●
chapter 4.6, "Management of settings", on page 141
●
chapter 4.7, "System settings", on page 145
●
chapter 4.8, "Messages and alarms", on page 166
4.1 Main Settings
The main settings for the R&S NRP2 are accessed via hardkeys.
4.1.1 Preset hardkey
(PRE)SET changes the instrument to its default state (Preset), to a predefined state for
a mobile radio standard or to a user-defined (Setup) state. A maximum of 10 states are
possible.
The highlighted background of the text indicates that the function can also be started
by pressing the (PRE)SET hardkey if the "File" menu is open.
1. Pressing this key once opens the "File" menu. Refer to chapter 4.6, "Management
of settings", on page 141 for description of the menu's topics.
2. Pressing the key a second time loads the preset settings.
When the preset state is selected, all default parameters are set - even those for oper-
ating modes that have not been activated. The following list gives an overview of the
preset values for the most important meter settings. Further preset values can be
found in the remote command description (*RST on page 198). Various parameters
including the following will be reset:
Main Settings
北京海洋兴业科技股份有限公司（证券代码：839145）
To Next Page
Loading...
