Instrument Functions
NRP2
92User Manual 1173.9140.02 ─ 07
With remote control, the window is selected with suffix <[1]..4> in the WINDow key-
word. For example, command SENSe:WINDow2:
STAT ON activates window 2.
4.3.3 The Windows menu
The "Windows"
menu is context-sensitive and displays only those menu items that are
relevant to the current measurement scenario. The menu includes all window functions
the instrument provides.
Fig. 4-24: Windows menu
4.3.3.1 Selecting a window
The window to be configured is selected by the tab.
Window dialog box tabs
Each window is assigned a tab. All the parameters settings in the "Window"
dialog box
act on the selected window.
Remote command:
DISPlay[:WINDow]:SELect on page 246
With remote command there is a distinction between selecting the active window and
selecting the window to be configured. The active window is selected using command
DISPlay:WINDows:SELect. The window to be configured is selected with the suffix
of the WINDows keyword. For example DISPLay:WINDow3:NAME defines the label of
window 3.
4.3.3.2 Using and arranging windows
The labeling of the second softkey in the "Windows" menu is context-sensitive and
changes according to the status of the active window.
Fig. 4-25: Windows menu, softkeys for controlling the windows
Displaying measurement results
北京海洋兴业科技股份有限公司（证券代码：839145）
To Next Page
Loading...
