Instrument Functions
NRP2
95User Manual 1173.9140.02 ─ 07
"Graph"
In the graphical display mode, the power meter displays the enve-
lope power as a function of time or in its distribution and distribution
density function (CCDF, CDF, PDF). Additional information on the
active settings is below the graph in the info panel.
See
chapter 4.5, "Displaying traces", on page 113
In halfsize representation, selected measurement values are indica-
ted on the left side of the graph.
Remote command:
DISPlay[:WINDow]<[1]..4>:
FORMat on page 242
4.3.3.4 Configuring the result display
Each of the display modes is configured individually.
Fig. 4-26: Display mode-specific settings
The available configuration parameters depend on the selected display mode.
●
"Dig"
In the digital display, the resolution is adjustable, see Setting the resolution.
For "TimeSlot AV"
measurements, the timeslot to be displayed can be chosen.
●
"D&A"
Displaying measurement results
北京海洋兴业科技股份有限公司（证券代码：839145）
To Next Page
Loading...
