Rohde & Schwarz PR100 - 11.1 Common Commands

R&S PR100 User Manual
CALCulate
. :IFPan
. . :CLEar
Restart of the averaging function for the IF-panorama data. The value
obtained from IF-panorama measurements thus far is deleted, and a new
value is obtained.
Parameters:
none
Example:
CALCulate:IFPan:CLEar
CALCulate
. :IFPan
. . :MARKer:MAXimum[:PEAK]
Centering of the IF-panorama spectrum to the absolute-level maximum. This
changes the receiver frequency SENS:FREQ:CW.
Parameters:
none
Example:
CALCulate:IFPan:MARKer:MAXimum
CALCulate:IFPan:MARKer:MAXimum