R&S PR100 User Manual
11.9 MEASure subsystem
MEASure
. :MODE CONTinuous|PERiodic
In the PERiodic measurement mode all detectors are discharged after the
measurement time has elapsed and the next measurement is started. Only
the individual measured values per measuring period are displayed.
In the CONTinuous measuring mode the measuring detector is read out
every 200 ms, irrespective of the measuring time. These current measured
values are displayed.
Remark:
Parameters:
CONTinuous continuous measurement
PERiodic periodic measurement
Example:
MEASure:MODE PERiodic
MEASure
. :MODE?
Query of the set measuring mode.
Parameters:
none
Result:
CONT, PER
Example:
MEASure:MODE? -> PER
To Next Page
Loading...
