R&S PR100 User Manual
MEMory
. :CONFig
. . :CATalog?
Outputs the name of the memory configuration. This name can only be
modified by uploading another configuration via the MEMory:CONFig
command.
Parameter:
none
Result:
Name of memory configuration file, in a format identical to that of
MMEM:CAT? (see [Orion SCPI]).
Example:
MEMory:CONFig:CATalog? -> 3000, 120000000 SomeConfigurationName,
.memlst, 1000, 14-12-2006, 19:05:03
MEMory
. :CONFig <block_data>
Upload and activate a configuration for memory locations.
Parameters:
<block_data> block data with memory configuration
Example:
MEMory:CONFig <block-data specific for memory configuration>
To Next Page
Loading...
