Rohde & Schwarz PR100 - 11.12 OUTPut subsystem

R&S PR100 User Manual
Parameters:
<src_name> source file/folder: String of characters (comma not allowed)
<dest_name> destination file/folder: String of characters (comma not
allowed)
Example:
MMEMory:MOVE “file1”, “file2”
MMEMory
. :RDIRectory <folder_name>
Removes an existing folder <folder_name> in the current folder of the mass
storage device. In case <name> does not exist in the current folder, an error is
generated: .-292, “Referenced name does not exist”.
Parameters:
<folder_name> String of characters (comma not allowed)
Example:
MMEMory:MDIRectory “SomeFolder”
11.12 OUTPut subsystem
d
OUTPut
. :AUX
. . :AUTO <Boolean>
Sets whether the auxilary bits on AUX1 are automatically determined by the
selected antenna or if they are manually affected by using the BITAux or
BYTAux commands.
*Parameters:
ON Automatic
OFF Manual
Example:
OUTPut:AUX:AUTO ON
d
OUTPut
. :AUX
. . :AUTO?
Queries whether the auxilary bits on AUX1 are automatically determined by
the selected antenna or if they are manually affected by using the BITAux or
BYTAux commands.