Rohde & Schwarz PR100 - Page 170

R&S PR100 User Manual
d
OUTPut
. :TONE
. . :THReshold
. . . :STEP
. . . . [:INCRement] <numeric_value>|MINimum|MAXimum
Setting the stepwidth for the OUTP:TONE:THR UP|DOWN command.
Parameters:
<numeric_value> stepwidth for level tone reference threshold in dBZV
MINimum|MAXimum setting the smallest/largest stepwidth
Example:
OUTP:TONE:THR:STEP 10 dBZV
d
OUTPut
. :TONE
. . :THReshold
. . . :STEP
. . . . [:INCRement]? [MINimum|MAXimum]
Query of tone-threshold stepwidth.
Parameters:
none query of currently set stepwidth
MINimum|MAXimum query of smallest/largest stepwidth
Result:
Stepwidth for level tone reference threshold in dBZV
Example:
OUTP:TONE:THR:STEP? -> 10