R&S PR100 User Manual
11.13 Program preset subsystem
This sub-system allows saving of all settings of the device as a “preset”. The
settings saved into a preset can be recalled, after which all the settings in the
preset are restored. The commands below allow for saving to and recalling
from presets.
PROGram
. : PRESet
. . :CATalog?
Query of available presets
Parameters:
none
Remark:
Beware that user defined preset names, using PROG:PRES:DEF <name>,
are not visible in the User Interface of the instrument. The User Interface
always display User Preset <nr> regardless the entered name via SCPI. The
name display User Preset <nr> is used when the user stores a preset via the
User Interface.
Result:
comma separated list of preset-names.
Example:
PROG:PRES:CAT? -> “User Preset 1”, “User Preset 2”
To Next Page
Loading...
