R&S PR100 User Manual
6.2 Top view
The following section describes how to set up the instrument and how to connect
external devices including the charger.
It then describes typical uses by means of screenshots.
6.3 Unpacking the instrument
The R&S PR100 is supplied in form-fit packaging consisting of an upper and lower
shell. The two shells are held together by a sleeve which encloses the packaging.
The packaging contains all accompanying accessories.
To unpack the instrument, remove the sleeve.
Remove the R&S PR100 and the accessories.
Remove the protective film from the screen.
Headphone connector
Antenna connector
Function keys
Key lock
Rotary knob
Function control and display elements
Volume control
AUX connector
To Next Page
Loading...
