Rohde & Schwarz PR100 - Page 196

R&S PR100 User Manual
[SENSe]
. :GCONtrol
. . [:FIXed|MGC] <numeric_value>|UP|DOWN|MINimum|MAXimum
Setting of MGC value.
Parameters:
<numeric_value> gain control factor in dB
UP|DOWN increase|decrease of the MGC value by the value set in
the command
SENSe:GCONtrol[:FIXed|MGC]:STEP[:INCRement].
MINimum|MAXimum setting the smallest|largest MGC value
MIN = no gain control -> maximum sensitivity
MAX = maximum gain control -> minimum sensitivity
Example:
GCONtrol 50