R&S PR100 User Manual
6.4 Setting up the instrument
The R&S PR100 portable monitoring receiver is designed for stationary, in-vehicle
and in particular for portable use.
Depending on operating conditions, the device can be set up perfectly for both
operation and the viewing angle of the display.
When used as a desktop instrument, the R&S PR100 can either lie flat or stand up
using the folding stand on the back.
For portable use, it is best to attach the receiver to the chest carrying strap. All the
control buttons are then easily accessible and the display can be easily read.
Depending on operating conditions, the device can be set up perfectly for both
operation and the viewing angle of the display.
When used as a desktop instrument, the R&S PR100 can either lie flat or stand up
using the folding stand on the back.
To Next Page
Loading...
