R&S PR100 User Manual
[SENSe]
. :MSCan
. . :CONTrol
. . . [:ON]?
Query of scan-control mechanism that is switched on.
Parameters:
none
Result:
A list of the scan-control mechanisms that are switched on is output. If nothing
is switched on, a zero string ("") is output. The following strings can be
expected:
" " no mechanism switched on
"STOP:SIGN" signal-controlled dwell-time is switched on
Example:
MSCan:CONTrol? -> "STOP:SIGN"
To Next Page
Loading...
