Rohde & Schwarz PR100 - Page 204

R&S PR100 User Manual
[SENSe]
. :MSCan
. . :COUNt <numeric_value>|MINimum|MAXimum|INFinity
The number of MSCans to be done in response to the command “INIT:IMM”.
Note that the scan mode must be MSCan. This value is mapped onto the
same variable as the frequency scan and pscan count variable, meaning that
a change affects all scan modes.
Parameters:
<numeric_value> number of scans
MINimum|MAXimum minimum|maximum number
INFinity infinite number
Example:
MSCan:COUNt 100
[SENSe]
. :MSCan
. . :COUNt? [MINimum|MAXimum]
Query of number of MSCans. This command is an alias of
SENS:SWE:COUN?.
Parameters:
none query of current number of scans
MINimum|MAXimum query of minimum|maximum number of scans
Result:
Number of scans; 9.9E37 is output for an infinite number
Example:
MSCan:COUNt? -> 100