Rohde & Schwarz R&S FPL1000 - Page 58

Trying Out the Instrument
R&S
®
FPL1000
58Getting Started 1179.4657.02 ─ 10
Figure 6-7: Time domain display of the calibration signal
7. Create a new measurement channel for I/Q analysis:
a) Press the [Mode] key.
b) Tap the "IQ Analyzer" button to activate a measurement channel for the I/Q
Analyzer application.
c) Tap the "Display Config" softkey to activate the SmartGrid mode.
Activating Additional Measurement Channels