Operating the Instrument
R&S
®
FPL1000
83Getting Started 1179.4657.02 ─ 10
Save
Stores data on the instrument ( "Save/Recall" menu).
Report Generator
Displays the "Report" menu to configure a report.
Undo
Reverts last operation, i.e. the status before the previous action is
retrieved.
The undo function is useful, for example, if you are performing a zero span mea-
surement with several markers and a limit line defined and accidentally select a
different measurement. In this case, many settings would be lost. However, if you
press [UNDO] immediately afterwards, the previous status is retrieved, i.e. the
zero span measurement and all settings.
Note: The [UNDO] function is not available after a [PRESET] or "Recall" opera-
tion. When these functions are used, the history of previous actions is deleted.
Redo
Repeats previously reverted operation
Zoom mode
Displays a dotted rectangle in the diagram that can be expanded to
define the zoom area.
Multiple zoom mode
Multiple zoom areas can be defined for the same diagram.
Zoom off
Displays the diagram in its original size.
SmartGrid
Activates "SmartGrid" mode to configure the screen layout.
Sequencer
Opens the "Sequencer" menu to perform consecutive measurements.
Gen On/Off
Enables/disables the internal generator.
Accessing the Functionality
To Next Page
Loading...
