STATus Subsystem R&S FSL
1300.2519.12 6.242 E-11
STATus:QUEue[:NEXT?]
This command queries the earliest error queue entry and deletes it.
Positive error numbers indicate device-specific errors, negative error numbers are error
messages defined by SCPI. If the error queue is empty, the error number 0, "No error", is
returned. This command is identical to the SYSTem:ERRor[:NEXT]? command.
Example
STAT:QUES?
Characteristics
*RST value: -
SCPI: conform
Mode
all
STATus:QUEStionable:ACPLimit[:EVENt]?
This command queries the contents of the EVENt section of the
STATus:QUEStionable:ACPLimit register. Readout deletes the contents of the EVENt section.
Example
STAT:QUES:ACPL?
Characteristics
*RST value: –
SCPI: device–specific
Mode
all
STATus:QUEStionable:ACPLimit:CONDition?
This command queries the contents of the CONDition section of the
STATus:QUEStionable:ACPLimit register. Readout does not delete the contents of the
CONDition section.
Example
STAT:QUES:ACPL:COND?
Characteristics
*RST value: –
SCPI: device–specific
Mode
all
To Next Page
Loading...
