R&S FSL Remote Commands of the Power Meter Option (K9)
1300.2519.12 6.377 E-11
Remote Commands of the Power Meter Option (K9)
In this section all remote control commands for Power Meter option are described in detail. The
abbreviation For details on conventions used in this chapter refer to section "Notation" on page 6.2 at
the beginning of this chapter.
For further information on analyzer or basic settings commands, refer to the corresponding subsystem
in "Remote Commands of the Base Unit" on page 6.5.
Subsystems of the Power Meter option (K9)
– "CALCulate Subsystem (Power Meter, K9)" on page 6.378
– "CALibration Subsystem (Power Meter, K9)" on page 6.380
– "FETCh Subsystem (Power Meter, K9)" on page 6.381
– "READ Subsystem (Power Meter, K9)" on page 6.382
– "SENSe Subsystem (Power Meter, K9)" on page 6.383
– "UNIT Subsystem (Power Meter, K9)" on page 6.388
To Next Page
Loading...
