Rohde & Schwarz R&S FSL3 - Mmemory Subsystem (SPECM, K14)

MMEMory Subsystem (SPECM, K14) R&S FSL
1300.2519.12 6.408 E-11
MMEMory Subsystem (SPECM, K14)
The MMEMory (mass memory) subsystem provides commands which allow for access to the storage
media of the instrument and for storing and loading various instrument settings.
The commands of the base unit are described in the chapter MMEMory Subsystem.
Commands of the MMEMory Subsystem
– MMEMory:SELect[:ITEM]:SPECtrogram
MMEMory:SELect[:ITEM]:SPECtrogram
This command adds the spectrogram data to the list of data subsets of a save/recall device
setting.
Parameter
ON | OFF
Example
MMEM:SEL:SPEC ON
Adds the spectrogram data to the list of data subsets.
Characteristics
RST value: OFF
SCPI: device–specific
Mode
SPECM