Rohde & Schwarz R&S FSL3 - Page 1174

R&S FSL CALCulate Subsystem (CATV, K20)
1300.2519.12 6.415 E-11
C
ALCulate<1|2>:ATV:LIMit:CARRiers:S1PRelative:UPPer
This command defines the relative upper power limit of the sound carrier 1.
T
he numeric suffixes <1|2> are irrelevant.
Parameter
–200 to 200 dB
Example
CALC:ATV:LIM:CARR:S1PR:UPP 20
Sets the relative lower power limit for sound carrier 1 to 20 dB.
Characteristics
RST value: –6 dB
SCPI: device–specific
Mode
CATV
CALCulate<1|2>:ATV:LIMit:CARRiers:S2IFoffset:LOWer
This command defines the lower frequency offset limit of the sound carrier 2.
The numeric suffixes <1|2> are irrelevant.
Parameter
–999,999 to 999,999 Hz
Example
CALC:ATV:LIM:CARR:S2IF:LOW 1KHZ
Sets the lower frequency offset limit for sound carrier 2 to 1 kHz.
Characteristics
RST value: –10 kHz
SCPI: device–specific
Mode
CATV
CALCulate<1|2>:ATV:LIMit:CARRiers:S2IFoffset:UPPer
This command defines the upper frequency offset limit of the sound carrier 2.
The numeric suffixes <1|2> are irrelevant.
Parameter
–999,999 to 999,999 Hz
Example
CALC:ATV:LIM:CARR:S2IF:UPP 500000HZ
Sets the upper frequency offset limit for sound carrier 2 to 500 kHz.
Characteristics
RST value: 10 kHz
SCPI: device–specific
Mode
CATV