Rohde & Schwarz R&S FSL3 - Input Subsystem (CATV, K20)

R&S FSL INPut Subsystem (CATV, K20)
1300.2519.12 6.481 E-11
INPut Subsystem (CATV, K20)
The INPut subsystem controls the input characteristics of the RF inputs of the instrument.
Commands of the INPut Subsystem
– INPut:ATTenuation
– INPut:ATTenuation:AUTO
– INPut:GAIN:STATe
– INPut:IMPedance
INPut:ATTenuation
For details refer to "INPut<1|2>:ATTenuation" on page 6.150.
INPut:ATTenuation:AUTO
For details refer to "INPut<1|2>:ATTenuation:AUTO" on page 6.151.
INPut:GAIN:STATe
For details refer to "Error! Reference source not found." on page Error! Bookmark not
defined..
INPut:IMPedance
For details refer to "INPut<1|2>:IMPedance" on page 6.151.