SENSe Subsystem (WCDMA, K72) R&S FSL
1300.2519.12 6.590 E-11
SENSe:FREQuency Subsystem (WCDMA, K72)
The SENSe:FREQuency subsystem defines the frequency axis of the active display. The frequency
axis can either be defined via the start/stop frequency or via the center frequency and span.
Commands of the SENSe:FREQuency Subsystem
– [SENSe<1|2>:]FREQuency:CENTer
– [SENSe<1|2>:]FREQuency:CENTer:STEP
– [SENSe<1|2>:]FREQuency:OFFSet
[SENSe<1|2>:]FREQuency:CENTer
For details refer to "[SENSe<1|2>:]FREQuency:CENTer" on page 6.200.
[SENSe<1|2>:]FREQuency:CENTer:STEP
For details refer to "[SENSe<1|2>:]FREQuency:CENTer:STEP" on page 6.201.
[SENSe<1|2>:]FREQuency:OFFSet
For details refer to "[SENSe<1|2>:]FREQuency:OFFSet" on page 6.203.
SENSe:SWEep Subsystem (WCDMA, K72)
The SENSe:SWEep subsystem controls the sweep parameters.
Commands of the SENSe:SWEep Subsystem
– [SENSe<1|2>:]SWEep:COUNt
[SENSe<1|2>:]SWEep:COUNt
For details refer to "[SENSe<1|2>:]SWEep:COUNt" on page 6.229.
To Next Page
Loading...
