Remote Commands of the CDMA2000 BTS Analyzer Option (K82) R&S FSL
1300.2519.12 6.606 E-11
C
haracteristics
RST value: -
SCPI: device-specific
M
ode
CDMA
CONFigure:CDPower[:BTS]:CTABle:COPY
This command copies one channel table to another. Select the channel table you want to copy
using the CONFigure:CDPower[:BTS]:CTABle:NAME command.
This command is an event and therefore has no *RST value and no query.
Parameter
<'string'> = name of the new channel table.
Example
INST:SEL BC2K
Activates the CDMA2000 BTS Analyzer option.
CONF:CDP:CTAB:NAME 'CTAB_1'
Selects channel table CTAB_1 for copying.
CONF:CDP:CTAB:COPY 'CTAB_2'
Copies CTAB_1 to C_TAB2.
Characteristics
RST value: -
SCPI: device-specific
Mode
CDMA
CONFigure:CDPower[:BTS]:CTABle:DATA
This command defines a channel table.
Parameter
For one table line, eight values are specified .
<channel type>, <code class>, <code number>, <radio configuration>, <reserved1>,
<reserved2>, <status>, <CDP relative>, ....
channel type
code class
code number
radio configuration
For details on the values refer to Channel Table on
page 6.627.
reserved1
reserved2
always 0 (reserved)
status 0: inactive
1: active
CDP relative any value in dB
The inactive channels (INACtive) do not have to be defined.
To Next Page
Loading...
