Rohde & Schwarz R&S FSL3 - Page 1547

CONFigure Subsystem (WiMAX, K92/K93) R&S FSL
1300.2519.12 6.788 E-11
C
ONFigure:BURSt:CONSt:CSYMbol[:IMMediate]
This command configures the Constellation vs Symbol measurement type.
T
his command is an event and therefore has no *RST value and no query.
Example
CONF:BURS:CONS:CSYM
Configures the Constellation vs Symbol measurement type.
INIT
Starts a Constellation vs Symbol measurement.
Characteristics
RST value: –
SCPI: device–specific
Mode
OFDM, OFDMA/WiBro
CONFigure:BURSt:CONSt:FORMat:SELect
This command selects the modulation format. It is only available if the Constellation vs Symbol
measurement is selected (see CONFigure:BURSt:CONSt:CSYMbol[:IMMediate]
command).
Parameter
ALL |QPSK | QAM16 | QAM64
Example
CONF:BURS:CONS:CSYM
Configures the Constellation vs Symbol measurement type.
CONF:BURS:CONS:FORM:SEL QPSK
Selects the QPSK modulation formats.
INIT
Starts a Constellation vs Symbol measurement. The results of the selected modulation formats
(QPSK) are calculated.
Characteristics
RST value: –
SCPI: device–specific
Mode
OFDMA/WiBro
CONFigure:BURSt:CONSt:SYMBol:SELect
This command selects the symbol. It is only available if the Constellation vs Symbol
measurement is selected (see CONFigure:BURSt:CONSt:CSYMbol[:IMMediate]
command).
Parameter
0 to 9999 symbol number
ALL all symbols