EasyManua.ls Logo

Rohde & Schwarz R&S FSL3 - Page 1548

Rohde & Schwarz R&S FSL3
1734 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
R&S FSL CONFigure Subsystem (WiMAX, K92/K93)
1300.2519.12 6.789 E-11
Example
CONF:BURS:CONS:CSYM
Configures the Constellation vs Symbol measurement type.
CONF:BURS:CONS:SYMB:SEL 1
Selects symbol 1.
INIT
Starts a Constellation vs Symbol measurement. The results of the selected symbol (1) are
calculated.
Characteristics
RST value:
SCPI: device–specific
Mode
OFDMA/WiBro
CONFigure:BURSt:EVM:ECARrier[:IMMediate]
This command configures the EVM vs Carrier measurement type.
This command is an event and therefore has no *RST value and no query.
Example
CONF:BURS:EVM:ECAR
Configures the EVM vs Carrier measurement type.
INIT
Starts a EVM vs Carrier measurement.
Characteristics
RST value:
SCPI: device–specific
Mode
OFDM, OFDMA/WiBro
CONFigure:BURSt:EVM:ESYMbol[:IMMediate]
This command configures the EVM vs Symbol measurement type.
This command is an event and therefore has no *RST value and no query.
Example
CONF:BURS:EVM:ESYM
Configures the EVM vs Symbol measurement type.
INIT
Starts a EVM vs Symbol measurement.
Characteristics
RST value:
SCPI: device–specific
Mode
OFDM, OFDMA/WiBro

Table of Contents

Related product manuals