Rohde & Schwarz R&S FSL3 - Page 1580

R&S FSL FETCh Subsystem (WiMAX, K92/K93)
1300.2519.12 6.821 E-11
FETCh:BURSt:EVM:DATA:AVERage? / FETCh:BURSt:EVM:DATA:MAXimum? /
FETCh:BURSt:EVM:DATA:MINimum?
This command returns the Error Vector Management measurement results summary (average,
minimum or maximum value) for the data carrier in dB.
This command is only a query and therefore has no *RST value.
Example
FETC:BURS:EVM:DATA:MAX?
The maximum EVM recorded for the data carrier is returned.
Characteristics
RST value: –
SCPI: device–specific
Mode
OFDM, OFDMA/WiBro
FETCh:BURSt:EVM:PILot:AVERage? / FETCh:BURSt:EVM:PILot:MAXimum? /
FETCh:BURSt:EVM:PILot:MINimum?
This command returns the Error Vector Management measurement results summary for the
EVM pilot carrier in dB.
This command is only a query and therefore has no *RST value.
Example
FETC:BURS:EVM:PIL:MAX?
The maximum EVM recorded for the EVM pilot carrier is returned.
Characteristics
RST value: –
SCPI: device–specific
Mode
OFDM, OFDMA/WiBro
FETCh:BURSt:FERRor:AVERage? / FETCh:BURSt:FERRor:MAXimum? /
FETCh:BURSt:FERRor:MINimum?
This command returns the measured average, minimum or maximum frequency errors in
Hz.???
This command is only a query and therefore has no *RST value.
Example
FETC:BURS:FERR:MAX?
The maximum frequency error from the most recent measurement is returned.
Characteristics
RST value: –
SCPI: device–specific
Mode
OFDM, OFDMA/WiBro