FETCh Subsystem (WiMAX, K92/K93) R&S FSL
1300.2519.12 6.822 E-11
FETCh:BURSt:GIMBalance:AVERage? / FETCh:BURSt:GIMBalance:MAXimum? /
FETCh:BURSt:GIMBalance:MINimum?
This command returns the measured average, minimum or maximum IQ imbalance errors in dB.
This command is only a query and therefore has no *RST value.
Example
FETC:BURS:GIMB:MAX?
The maximum IQ Imbalance error from the most recent measurement is returned.
Characteristics
RST value: –
SCPI: device–specific
Mode
OFDM, OFDMA/WiBro
FETCh:BURSt:IQOFfset:AVERage? / FETCh:BURSt:IQOFfset:MAXimum? /
FETCh:BURSt:IQOFfset:MINimum?
This command returns the measured average, minimum or maximum IQ offset errors in dB.
This command is only a query and therefore has no *RST value.
Example
FETC:BURS:IQOF:MAX?
The maximum IQ Offset error from the most recent measurement is returned.
Characteristics
RST value: –
SCPI: device–specific
Mode
OFDM, OFDMA/WiBro
FETCh:BURSt:QUADoffset:AVERage? / FETCh:BURSt:QUADoffset:MAXimum? /
FETCh:BURSt:QUADoffset:MINimum?
This command returns the accuracy in terms of the phase error of symbols within a burst.
This command is only a query and therefore has no *RST value.
Example
FETC:BURS:QUAD:MAX?
The maximum angle error recorded for a symbol during the measurement.
Characteristics
RST value: –
SCPI: device–specific
Mode
OFDM, OFDMA/WiBro
To Next Page
Loading...
