R&S FSL Configuring the Sweep Mode – SWEEP Key
1300.2519.12 4.27 E-11
S
weep Points
Opens an edit dialog box to enter the number of measured values to be collected during one
sweep.
– Entry via rotary knob:
In the range from 101 to 1001, the sweep points are increased or decreased in steps of 100
points.
In the range from 1001 to 32001, the sweep points are increased or decreased in steps of 1000
points.
– Entry via keypad:
All values in the defined range can be set.
The default value is 501 sweep points. If a value 501 is set, the auto peak detector is turned
off automatically.
Remote: SWE:POIN 501
To Next Page
Loading...
