Rohde & Schwarz R&S FSL3 - Page 246

R&S FSL Using Markers and Delta Markers – MKR Key
1300.2519.12 4.61 E-11
Marker to Trace
Opens an edit dialog box to enter the number of the trace, on which the marker is to be placed.
 Remote: CALC:MARK1:TRAC 1
 Remote: CALC:DELT:TRAC 1
Marker Demod
Opens a submenu to set the demodulation mode and duration. For more details see also "AF
demodulation" on page 4.56.
Mkr Demod On/Off
Switches the demodulation on/off. For more details see also "AF demodulation" on page 4.56.
 Remote: CALC:MARK1:FUNC:DEM ON
AM
Sets AM as demodulation mode. This is the default setting. For more details see also "AF
demodulation" on page 4.56.
 Remote: CALC:MARK1:FUNC:DEM:SEL AM
FM
Sets FM as demodulation mode. Default setting is AM. For more details see also "AF
demodulation" on page 4.56.
 Remote: CALC:MARK1:FUNC:DEM:SEL FM
Mkr Stop Time
Opens an edit dialog box to enter the demodulation stop time for span > 0. For more details see
also "AF demodulation" on page 4.56.
 Remote: CALC:MARK1:FUNC:DEM:HOLD 3s
Cont Demod (span > 0)
Switches the continuous demodulation on or off. If the sweep time is long enough, the set
frequency range can be monitored acoustically. For more details see also "AF demodulation" on
page 4.56.
 Remote: CALC:MARK1:FUNC:DEM:CONT ON
Volume
Opens an edit dialog box to regulate the volume for acoustic monitoring. For more details see
also "AF demodulation" on page 4.56.
 Remote: SYST:SPE:VOL 0.5