Power Measurements – MEAS Key R&S FSL
1300.2519.12 4.104 E-11
Remote: CALC:STAT:PRES
Adjust Settings
Adjusts the level settings according to the measured difference between peak and minimum
power for APD measurement or peak and mean power for CCDF measurement in order to
obtain maximum power resolution. Adapts the probability scale to the selected number of
samples. Adjusts the reference level to the current input signal. For details see also Adjust Ref
Level softkey.
Remote: CALC:STAT:SCAL:AUTO ONCE
CCDF
Activates the function to measure the complementary cumulative distribution function (CCDF)
and opens a submenu.
Remote: CALC:STAT:CCDF ON
Spectrum Emission Mask
Opens a submenu to configure the Spectrum Emission Mask measurement.
The Spectrum Emission Mask (SEM) measurement defines a measurement that monitors
compliance with a spectral mask. The SEM measurement of the base unit allows a flexible
definition of all parameters in the SEM measurement.
This softkey is available from firmware version 1.80.
Remote: SWE:MODE ESP
To Next Page
Loading...
