R&S FSL Measurement Mode Menus – MENU Key
1300.2519.12 4.131 E-11
Measurement Mode Menus – MENU Key
The MENU key provides a quick access to the menu of the current measurement mode. For details on
measurement modes refer to "Measurement Mode Selection – MODE Key" on page 4.129.
To access the main menu of an active measurement mode
Press the MENU key.
The menu of the current measurement mode is displayed.
If the tracking generator, the power meter, and the spectrogram are available in the current
measurement mode, softkeys for these functions are also provided In the Spectrum Analyzer
mode with active acoustic monitoring, the softkey Marker Demod Volume to control the volume
control for acoustic monitoring is displayed.
Menu and softkey description
– "Optional softkeys of the menu menu" on page 4.131
To display help to a softkey, press the HELP key and then the softkey for which you want to display
help. To close the help window, press the ESC key. For further information refer to section "How to use
the Help System".
Optional softkeys of the menu menu
Apart from the softkeys of the current measurement mode, the following optional softkeys are available
in the menu menu. It is possible that the basic unit does not provide all these softkeys. If a softkey is
only available with a special option, model or (measurement) mode, this information is delivered in the
corresponding softkey description.
Menu / Command
Tracking Generator
Power Meter
Spectrogram
Marker Demod Volume
Tracking Generator (models 13, 16 and 28)
Displays the menu of the Tracking Generator measurement mode. For details refer to
"Tracking Generator (Models 13, 16 and 28)" on page 4.134.
Power Meter (Power Sensor Support option, K9)
Displays the menu of the Power Meter measurement mode. For details refer to "Power Meter
(Option K9)" on page 4.186.
To Next Page
Loading...
