Spectrogram Measurement (Option K14) R&S FSL
1300.2519.12 4.194 E-11
Softkeys of the spectrogram menu
The following table shows all softkeys available in the spectrogram menu (MENU key). It is possible
that your instrument configuration does not provide all softkeys. If a softkey is only available with a
special option, model or (measurement) mode, this information is delivered in the corresponding softkey
description.
For the description of the other main softkeys refer to "Optional softkeys of the menu menu" on page
4.131.
Command
Spectrogram On/Off
History Depth
Color
Maximize Size
Time Stamp On/Off
Spectrogram On/Off
Activates or deactivates the Spectrogram Measurement option.
Remote: CALC:SPEC ON
History Depth
Opens an edit dialog box to enter the number of frames to be stored in the history buffer. The
maximum number of frames depends on the number of sweep points (Sweep Points softkey)
and is determined according to "Maximum number of frames" on page 4.193.
If the history buffer is full, the oldest frame results are overwritten by the new ones.
Remote: CALC:SPEC:HDEP 1000
Color
Opens the Frame Color dialog box to select the frame color setting.
Color
RGB colors
Radar
black – green – white
Grayscale
black and white
Remote: CALC:SPEC:COL RAD
Maximize Size
Changes the screen layout.
Activated Enlarges the spectrogram result display and scales down the spectrum
analyzer result display.
Deactivated Divides the screen in two equally sized panes.
Remote: CALC:SPEC:SIZE LARG
To Next Page
Loading...
