R&S FSL Cable TV Measurements (Option K20)
1300.2519.12 4.205 E-11
• digital TV measurements:
–
"Spectrum" on page 4.218
– "Overview" on page 4.219
– "Constellation Diagram (Modulation Analysis)" on page 4.219
– "Modulation Errors (Modulation Analysis)" on page 4.220
– "Echo Pattern (Channel Analysis)" on page 4.220
– "Channel Power" on page 4.221
– "APD" on page 4.221
– "CCDF" on page 4.222
• TV analyzer measurement:
– "Tilt" on page 4.222
To edit a channel table
1. Press the Channel Setup softkey.
The Channel Tables dialog box is displayed.
If a measurement is running, the channel table used in the measurement (so–called active channel
table) is the channel table in focus. For further details refer also to "Channel tables" on page 4.210.
2. In the Channel Tables dialog box, focus the channel table you want to edit.
3. Press the Edit softkey.
The Channel Table dialog box and the edit submenu is displayed. Each line in the channel table
represents one channel.
The channels are displayed as they are entered and are not sorted automatically. If you prefer the
entries ordered with respect to their channel number, enter the channels accordingly.
To Next Page
Loading...
