CDMA2000 BTS Analyzer (Option K82) R&S FSL
1300.2519.12 4.340 E-11
Softkeys of the sweep menu (CDMA2000 BTS Analyzer mode)
The following table shows all softkeys available in the sweep menu in CDMA2000 BTS Analyzer mode.
It is possible that your instrument configuration does not provide all softkeys. If a softkey is only
available with a special option, model or measurement mode, this information is delivered in the
corresponding softkey description.
Command
Continuous Sweep
Single Sweep
Continue Single Sweep
Sweeptime Manual
Sweeptime Auto
Sweep Count
Sweep Points
Continuous Sweep
For details refer to the Continuous Sweep softkey in the sweep menu of the base unit.
Single Sweep
For details refer to the Single Sweep softkey in the sweep menu of the base unit.
Continue Single Sweep
For details refer to the Continue Single Sweep softkey in the sweep menu of the base unit.
Sweeptime Manual
For details refer to the Sweeptime Manual softkey in the sweep menu of the base unit.
The softkey is not available for code domain and the CCDF measurements.
Sweeptime Auto
For details refer to the Sweeptime Auto softkey in the sweep menu of the base unit.
The softkey is not available for code domain and the CCDF measurements.
Sweep Count
For details refer to the Sweep Count softkey in the sweep menu of the base unit.
Sweep Points
For details refer to the Sweep Points softkey in the sweep menu of the base unit.
To Next Page
Loading...
