R&S FSL WLAN TX Measurements (Option K91 / K91n)
1300.2519.12 4.415 E-11
Menu / Command Command
Constell vs Symbol/Carrier
Carrier Selection
More
Gating Settings On/Off
Import
Export
Y–Axis/Div
R&S Support
Spectrum Settings General/Demod
Display List/Graph
Spectrum Flatness
Spectrum Mask / Spectrum IEEE/ETSI
Spectrum FFT
Spectrum ACPR / Spectrum ACP / ACP Rel/Abs
More
same contents as PVT side menu
Statistics Settings General/Demod
Display List/Graph
CCDF
Bitstream
Signal Field / PLCP Header
More
same contents as PVT side menu
Settings General/Demod
Opens the General Settings or the Demod Settings dialog box. Screenshots of the dialog
boxes are provided in chapter "Advanced Measurement Examples", section "Measurement
Examples of the WLAN TX Measurements Option (K91/K91n)".
Alternatively, the General Settings dialog box is opened as follows:
– FREQ key, with focus on the Frequency field
– AMPT key, with focus on the Signal Level (RF) field
– TRIG key, with focus on the Trigger Mode field
In the General Settings dialog box, all settings related to the overall measurement can be
modified. The right pane with the advanced settings is only displayed if the Advanced Settings
option is activated. The General Settings dialog box contains the following elements:
Signal Characteristics Standard
Frequency
Channel No
Level Settings Signal Level
To Next Page
Loading...
