WLAN TX Measurements (Option K91 / K91n) R&S FSL
1300.2519.12 4.430 E-11
Constell vs Symbol/Carrier
Selects the Constallation vs Symbol or the Constellation vs Carrier result displays.
– Constellation vs Symbol (all standards)
This result display shows the in–phase and quadrature phase results over the full range of the
measured input data. The ideal points for the selected modulations scheme are displayed for
reference purposes.
The amount of data displayed in the Constellation result display can be reduced by selecting
the carrier or carriers for which data is to be displayed (Carrier Selection softkey).
– Constellation vs Carrier (IEEE 802.11a, g, j, n – OFDM)
This result display shows the in–phase and quadrature phase results over the full range of the
measured input data plotted on a per–carrier basis. The magnitude of the in–phase and
quadrature part is shown on the y–axis, both are displayed as separate traces (I–> trace 1, Q–>
trace 2).
Remote: CONF:BURS:CONS:CSYM (Constellation vs Symbol)
Remote: CONF:BURS:CONS:CCAR (Constellation vs Carrier)
To Next Page
Loading...
