R&S FSL WLAN TX Measurements (Option K91 / K91n)
1300.2519.12 4.433 E-11
Spectrum ACPR (IEEE 802.11a, g, n, OFDM Turbo Mode)
Spectrum ACP (IEEE 802.11b)
ACP Rel/Abs (IEEE 802.11j)
Sets the ACP (Adjacent Channel Power) result display.
This result display is similar to the Spectrum Mask measurement, and provides information
about leakage into adjacent channels. The results show the absolute or relative power
measured in the three nearest channels either side of the measured channel. This measurement
is the same as the adjacent channel power measurement provided by the spectrum analyzer.
The number of sweeps is set in the General Settings dialog box, Sweep Count field. If the
measurement is performed over multiple sweeps both a max hold trace and an average trace
are displayed.
Remote: CONF:BURS:SPEC:ACPR
Remote: CALC:MARK:FUNC:POW:RES? (result query)
Remote: CALC:MARK:FUNC:POW:RES:MAXH? (result query)
Statistics
Opens a submenu to display statistics measurement results.
To Next Page
Loading...
