Rohde & Schwarz R&S FSL3 - Page 624

R&S FSL WLAN TX Measurements (Option K91 / K91n)
1300.2519.12 4.439 E-11
Softkeys of the lines menu (WLAN mode)
The following table shows all softkeys available in the lines menu in WLAN mode (LINES key). It is
possible that your instrument configuration does not provide all softkeys. If a softkey is only available
with a special option, model or (measurement) mode, this information is delivered in the corresponding
softkey description.
This menu is only available if the results are displayed in form of a list (for details see Result summary
list and Display List/Graph softkey).
Command
Default Current
Default All
Default Current
Resets all limits for the current modulation scheme to the values specified in the selected
standard.
 Remote: see CALCulate:LIMit Subsystem
Default All
Resets all limits for all modulation schemes to the values specified in the selected standard.
 Remote: see CALCulate:LIMit Subsystem
Softkeys of the trace menu (WLAN mode)
The following table shows all softkeys available in the trace menu in WLAN mode (TRACE key). It is
possible that your instrument configuration does not provide all softkeys. If a softkey is only available
with a special option, model or (measurement) mode, this information is delivered in the corresponding
softkey description.
Command
Display List/Graph
Screen A/B
Screen Full/Split
Display List/Graph
For details refer to the Display List/Graph softkey in the WLAN menu.
Screen A/B
Selects the active screen for IQ measurement results in split and full screen mode. Only the
markers of an active screen can be controlled.
 Remote: DISP:WIND1:SSEL