WiMAX, WiBro Measurements (Options K92/K93) R&S FSL
1300.2519.12 4.450 E-11
Menu / Command Command
Export
R&S Support
File Manager For the available File Manager
softkeys, see the description of the File
Manager softkey.
Settings General/Demod
Opens the General Settings dialog box or the Demod Settings dialog box. Screenshots of the
dialog boxes are provided in chapter "Advanced Measurement Examples", section
"Measurement Examples of the WiMAX IEEE 802.16 OFDM, OFDMA Measurements option
(K93)".
Alternatively, the General Settings dialog box is opened as follows:
– FREQ key, with focus on the Frequency field
– AMPT key, with focus on the Signal Level (RF) field
– TRIG key, with focus on the Trigger Mode list
In the General Settings dialog box, all settings related to the overall measurement are modified.
The right pane with the advanced settings is only displayed, if the Advanced Settings option is
activated. The General Settings dialog box contains the following elements:
Pane Field/List Standard Restrictions
Signal Characteristics Standard
Frequency
Channel No IEEE 802.16–2004 OFDM
Frequency Band
FFT Size NFFT IEEE 802.16e–2005 OFDMA/WiBro
Channel BW
Sample Rate
G = Tg/Tb
Level Settings Signal Level
Auto Lev
Ext Att
Data Capture Settings Capture Time
Burst Count
Analyze Bursts
Sweep Time
Sweep Count
Trigger Settings Trigger Mode
Trigger Offset
Power Level
Auto Lvl
Input Settings Advanced Auto Level Time
Ref Level
Attenuation
To Next Page
Loading...
