WiMAX, WiBro Measurements (Options K92/K93) R&S FSL
1300.2519.12 4.480 E-11
– IEEE 802.16–2004 OFDM
– IEEE 802.16e–2005 OFDMA/WiBro
Remote: CONF:BURS:SPEC:FFT
ACPR Abs/Rel
Sets the ACPR (Adjacent Channel Power Relative) result display in graphical form (Display
Graph selected), or in tabular form (Display List 1/2 selected).
This result display is similar to the Spectrum Mask measurement, and provides information
about leakage into adjacent channels. The results show the relative power measured in the
three nearest channels either side of the measured channel. This measurement is the same as
the adjacent channel power measurement provided by the spectrum analyzer.
The number of sweeps is set in the General Settings dialog box, Sweep Count field. If the
measurement is performed over multiple sweeps both a max hold trace and an average trace
are displayed.
To Next Page
Loading...
