R&S FSL WiMAX, WiBro Measurements (Options K92/K93)
1300.2519.12 4.481 E-11
– IEEE 802.16–2004 OFDM
– IEEE 802.16e–2005 OFDMA/WiBro
Remote: CONF:BURS:SPEC:ACPR
Remote: CONF:BURS:SPEC:ACPR:SEL ABS
Remote: CALC2:MARK:FUNC:POW:RES? (result query)
Remote: CALC2:MARK:FUNC:POW:RES:MAXH? (result query)
ACP Settings
Opens the ACP Settings dialog box to configure the ACPR result display. By default, the ACP
settings are derived from the General Settings dialog box, Channel BW field.
Pane Field Description
Channels No. of Channels Specifies the number of channels adjacent to the transmit
channel to be measured.
If set to 0, only the transmit channel is measured.
TX/ACP Channel BW TX Specifies the bandwidth of the transmit channel to be measured
To Next Page
Loading...
