WiMAX, WiBro Measurements (Options K92/K93) R&S FSL
1300.2519.12 4.482 E-11
Pane Field Description
by the ACP measurement.
Adjacent,
Alternate 1,
Alternate 2,
Alternate 3,
Alternate 4
Specifies the bandwidth of the first to fifth channel before and
after the transmit channel to be measured.
ACP Channel Spacing Adjacent,
Alternate 1,
Alternate 2,
Alternate 3,
Alternate 4
Specifies the spacing of the first to fifth channel before and
after the transmit channel to be measured.
Remote: POW:ACH:ACP 3 (No. of Channels)
Remote: POW:ACH:BAND 30kHz (TX)
Remote: POW:ACH:SPAC 33kHz (Adjacent/TX)
Remote: POW:ACH:SPAC:ALT1 100kHz (Alternate 1 to 4/TX)
Remote: POW:ACH:BAND:ACH 30kHz (Adjacent)
Remote: POW:ACH:BAND:ALT2 30kHz (Alternate 1 to 4)
Statistics
Opens a submenu to display statistics measurement results.
CCDF
Sets the CCDF result display in graphical form (Display Graph selected), or in tabular form
(Display List 1/2 selected).
This result display shows the probability of an amplitude within the gating lines exceeding the
mean power measured between the gating lines. The x–axis displays power relative to the
measured mean power.
If the gate start or gate length are altered then the results can be updated to reflect these
changes by pressing the Refresh softkey in the sweep menu.
– IEEE 802.16–2004 OFDM
To Next Page
Loading...
